The CHX35 family of coils are designed with aluminum tube construction which provides great heat transfer and additional resistance to environmental contaminants. Durable components, such as corrosion-resistant casing and drain pans, help guard against unexpected service calls. CHX35-36C-6F-1 coil is built to high standards and is backed by

per ton (26.9 L/S per kW) can lead to coil icing and greatly shorten compressor life. We conclude that improving evaporator air flow to rated values (often 400 cfm/ton or 53.8 L/S per kW) in

Evaporator Coil - Two circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.

The 15 ton bridge crane system is composed of the following parts: Steel structure workshop (columns, rail beams, roof beams, roof panels, wall panels, etc.) Bridge crane. Bridge running track. Crane power supply (slip line) We design the overhead crane system according to your needs! Overhead Crane System.

* Piston listed is for any approved non-capillary tube coil combination. Piston is shipped with outdoor unit and must be installed in an approved indoor coil. UNIT SIZE / SERIES 018-74 024-74 036-74, 94 048-94 060-94 OPERATING WT (Lb/Kg) 122 / 55.3 131 / 59

High-efficiency outdoor coil—provides exceptional heat transfer and low air resistance for high-efficiency operation Quiet Operation Sound levels—as low as 74 dB Home Comfort Dependable scroll compressor—provides smooth, efficient and reliable operation

CR33 Indoor Coils CR33-24A-F Minimal air resistance for better performance 1.5 to 5-ton capacities Cased Down-flow configuration Large-face area coil allows for high efficiency operation Copper-rifled tubing and enhanced aluminum fins improve transfer Long lasting

2 42CE Fan Coil Units are the new energy saving products improved with advanced technology by Carrier. The units have advanced technology of low noise fan, air condition manufacture process and the last lanced sine wave fin. 42CE is developed to be an ultra

Indoor and outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the

manufacturer of the outdoor equipment. 6. Metering Device All units are shipped and installed with an internally-checked, non-bleed TXV designed for air conditioning or heat pump operation. Some outdoor models may require a start assist kit. See outdoor unit for

25-ton-and-under equipment certified in accordance with ULE certification program, which is based on ARI Standard 210/240. 3Cooling ratings, 95 F (35 C) outdoor air temperature and 80 F (27 C) db/67 F (19 C) wb entering indoor coil air.

Indoor and Outdoor Units Application and Performance Information September 2015 CLCH-PRC022B-EN Catalog † Ability to choose the exact number of fins per foot of coil surface to enhance heat transfer and air pressure performance † Wide array of fan ...

Xinxiang Hundred Percent Electrical And Mechanical Co., Ltd., Experts in Manufacturing and Exporting Rail Transfer Cart, Trackless Transfer Car and 5256 more

2 ton overhead crane is a kind of small overhead lifting equipment that typically comes in single girder construction. It can be designed for general lifting purposes as well as special lifting applications, such as to lift and move a heavy load in workshops, warehouses, workstations, steel mills and chemical plants.

This is the 2 to 2.5 ton left hand 4 row refrigerant coil module with R410A TXV and stainless steel primary drain pan. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal performance and operation, visit ahridirectory.com.