Carrier Ducted DX Split Unit. The 40RU series indoor air handler contains a chilled water coil and may be interfaced into chilled water systems. Sizes: 6 ton, 7.5, 12.5, 15, 20, 25, 30 ton. Prices and attributes available upon enquiry. CALL 665-2235.

This is the 2.5 to 3 ton left hand 4 row refrigerant coil module with R410A TXV and stainless steel primary drain pan. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal performance and operation, visit ahridirectory.com.

Indoor and Outdoor coils are computer--designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit. Low sound ratings ensure a quiet indoor and outdoor

This is the 2 to 2.5 ton left hand 6 row refrigerant coil module with R410A TXV and stainless steel primary drain pan. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal performance and operation, visit ahridirectory.com.

Rail transfer cart is an efficient material transporting cart powered by the rails, and the rails need to be insulated. We manufacture transfer carts with capacities ranging from 2 tons to over 150 tons, commonly used in machine shops, warehouses, metallurgical plants to move heavy loads throughout the facility or between crane bays.

A = Aluminum Coil / R-410A Series Nominal Cooling Capacity - Tons 018/024 = 1.5 to 2 tons 030 = 2.5 tons 036 = 3 tons 042 = 3.5 tons 048 = 4 tons 060 = 5 tons Refrigerant Metering Device 6 = TXV - R-410A Non-bleedport (indoor unit) Minor Revision Number Voltage 230 = 208/230V-60hz-1ph Configuration MV = Multi-Position, Variable Speed Blower Motor

Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube PGR5 Ultra Low NOx 16 SEER 2-Stage Packaged Air Conditioner and Single Stage Gas Furnace System with R-410A Refrigerant Single and Three Phase 2 to 5 Nominal Tons (Sizes 24-60)

This is the 4 to 5 ton 3 row left hand refrigerant coil module. It comes with a R410A TXV. It has an L shaped stainless steel drain pan for horizontal or vertical up flow installation. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal

The trackless transfer trolley is very flexible, it can move freely around the plant both indoor and outdoor. The cart is equipped with non-marking wheels to avoid any mark on floor. With easy operation, it is great choice for limited space and constricted paths.

Allows outdoor section to be isolated from indoor coil. SERVICE ACCESS - Control box as well as the compressor and other refrigerant controls are accessible through access panels. Control box may be open without affecting the normal operation of the unit.

The CHX35 family of coils are designed with aluminum tube construction which provides great heat transfer and additional resistance to environmental contaminants. Durable components, such as corrosion-resistant casing and drain pans, help guard against unexpected service calls. CHX35-30A-6F-1 coil is built to high standards and is backed by

All cranes are designed and produced based on national standards and industrial safety requirements. For any types of gantry cranes, just send email to sales@crane.pk, we will reply you asap. Reliable Rail Mounted Gantry Crane. Parameters: Lifting Capacity: 5t~500t. Span Length: 18~35m. Lifting Height: 6~18m. Lifting Speed: 1.5~11.5m/min.

• Cycles the outdoor fan while allowing compressor operation in the cooling cycle • This intermittent fan operation allows the system to operate without icing the evaporator coil and losing capacity • Designed for use in ambient temperatures no lower than 0°F NOTE - A crankcase heater must be installed on the compressor. CABINET Construction

Coil transfer cart is normally designed with V-decks to handle and transport coils and rolls. It is capable of handling heavy loads up to 150 tons. The material handling cart is a more cost-effective solution to transport heavy loads in your facility as compared to other equipment like fork lift truck.

This is the 3 to 3.5 ton left hand 6 row refrigerant coil module with R410A TXV and stainless steel primary drain pan. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal performance and operation, visit ahridirectory.com.