Modine supplies high-quality, durable, and long-lasting unit heaters to millions of workshops and homes across the globe. The Modine PTS 300,000 BTU Unit Heater is no exception to this rule, with reliability to last decades. Capable of heating large areas efficiently, with adjustable air deflector blades to direct air wherever it needs to go, this unit heater also reduces startup and shut-off

Description. Unique cabinet design that meets new stringent regulations for air leakage. Meets requirements of a 2%cabinet leakage rate when tested at 1.0 inches of static pressure. All pans constructed of an injection molded glass-filled polycarbonate engineered resin material, with brass drain connections.

The evaporator coil, or indoor coil, is often described as the "cold" coil and works by absorbing heat from the indoor air blown over by the air handler's fan. The condenser coil or outdoor coil is the "warm" coil as it rejects the heat as a fan blows outside air over the surface.

13+ SEER — 1.5 - 5 Ton Capacity Approximate (lbs.) Ship 175 180 200 215 265 290 300 Model Number SH2BD- ... Outdoor Unit Indoor TXV Coil Cooling Capacity

Indoor and Outdoor coils are computer--designed for optimum heat transfer and efficiency. The indoor coil is fabricated from copper tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit. Copper fin coils and pre--coated fin coils

1 SCROLL COMPRESSOR(S)—Provides smooth, efficient and quiet operation. 2 OUTDOOR COIL FAN(S)—Moves large volumes of air uniformly through entire condenser coil for high system efficiency. 3 COPPER TUBE/ENHANCED FIN COIL— Lanced fins provide maximum exposure of fin surface to air stream, resulting in excellent heat transfer.

The 4MXC is a 1.5–5 ton cased value model coil suitable for universal installations—up, down, horizontal, left, or right airflow. Also known as an evaporator coil or an indoor coil, this piece is the unsung hero of your heating or cooling system. Our all-aluminum coils are designed to work with your outdoor condensing unit or furnace.

a chilled water cooling coil. Figure 1 shows the system schematic and psychrometric chart showing the cooling and dehumidification process. Outdoor air, after exchanging energy with exhaust air (1-2) passes over the cooling coil to cool the air down to the required leaving air humidity ratio (2-3) and then is

as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation Low Pressure Switches • Protects the compressors from low pressure conditions such as low refrigerant charge, or low/no airflow Freezestats • Protects the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low

Preparation And Inspection Before Operation of Gantry Crane. The gantry crane should be operated by personnel trained in crane operation. The driver should understand the structure and performance of the crane, be familiar with its working principle and operating device, master the function of its safety device and the correct operation method, and conductcareful and timely maintenance.

Jan 15, 2020 · dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation. Freezestats Protects the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge. C D E Eco-last™ Coil System Condenser coil features lightweight, all aluminum brazed fin construction. Constructed of three

A - Reusing existing refrigeration line and indoor coils. 1. Drain as much oil as possible from line set and / or indoor coil. 2. Purging the line set and coil with dry nitrogen may be required to recover oil from the horizontal refrigerant piping and coil circuitry. The indoor coil may require removal in order to purge all existing oil from

Coil transfer cart is normally designed with V-decks to handle and transport coils and rolls. It is capable of handling heavy loads up to 150 tons. The material handling cart is a more cost-effective solution to transport heavy loads in your facility as compared to other equipment like fork lift truck.

This is the 2 to 2.5 ton left hand 4 row refrigerant coil module with R410A TXV and stainless steel primary drain pan. All Unico refrigerant coils can be used for both heat pump and A/C only applications. To verify which Unico coil matches your specific outdoor unit for optimal performance and operation, visit ahridirectory.com.

›› 7mm All Aluminum Evaporator Coil: – Enhance indoor comfort. – Outstanding heat transfer properties – Improve refrigerant balance between Indoor and Outdoor unit. ›› Variable-speed Electrically Commutated Motor (ECM): – Provides gradual startup and shutdown for unobtrusive operation with lower energy consumption.